DOE-HDBK-1016/2-93
ENGINEERING FABRICATION, CONSTRUCTION,
Engineering Fabrication,
AND ARCHITECTURAL DRAWINGS, EXAMPLES
Construction, and Architectural Drawings
PR-06
Page 16
Rev. 0
Answers to example 1.
1.
5' 6"
2.
4' 1"
3.
9" (4' 10" side-to-side distance - 4' 1" front-to-back distance)
Answers to example 2.
1.
Using Figure 6, the straight line in the geometric characteristic box indicates
"straightness." This implies that the surface must be straight to with in 0.02 inches.
2.
16.00 inches
3.
15.89 inches
Answers to example 3.
1.
Using Figure 6, the circle with two parallel bars in the geometric characteristic box
indicates "Cylindricity," or how close to being a perfect cylinder it must be (in this case
0.25 inches).
2.
4.15 inches. The nominal length of 4.1 plus the tolerance of 0.05.
3.
4.05 inches. The nominal length of 4.1 minus the tolerance of 0.05.
