• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REFERENCES - h1013v1_88
HEAD FLOW METERS - h1013v1_91

Instrumentation and Control Volume 1 of 2
Page Navigation
  58    59    60    61    62  63  64    65    66    67    68  
Flow Detectors OBJECTIVES TERMINAL OBJECTIVE 1.0 Given  a  flow  instrument,  RELATE  the  associated  fundamental  principles,  including possible failure modes, to that instrument. ENABLING OBJECTIVES 1.1 EXPLAIN the theory of operation of a basic head flow meter. 1.2 DESCRIBE the basic construction of the following types of head flow detectors: a. Orifice plates b. Venturi tube c. Dall flow tube d. Pitot tube 1.3 DESCRIBE  the  following  types  of  mechanical  flow  detectors,  including  the  basic construction and theory of operation. a. Rotameter b. Nutating Disk 1.4 DESCRIBE  density  compensation  of  a  steam  flow  instrument  to  include  the  reason density compensation is required and the parameters used. 1.5 Given  a  block  diagram  of  a  typical  flow  detection  device,  STATE  the  purpose  of  the following blocks: a. Differential pressure (DP) transmitter b. Extractor c. Indicator 1.6 STATE the three environmental concerns which can affect the accuracy and reliability of flow sensing instrumentation. Rev. 0 Page v IC-04







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.